Energy-efficient spray foam solutions for Bath, NY. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Full-spectrum spray foam solutions for residential and commercial buildings in Bath, NY.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
Preventive roof maintenance programs with scheduled inspections, drain cleaning, minor repairs, and detailed photo-documented condition reports. Catch small problems before they become expensive emergencies.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Elastomeric coatings for standing seam, corrugated, and R-panel metal roofs. We seal rust spots, failing fasteners, open seams, and ridge caps — stopping leaks and adding reflective energy savings in a single application.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Ponding water, chronic leaks, and moisture infiltration destroy roofs and building interiors. Our waterproofing systems use closed-cell spray foam and silicone coatings to create an impermeable barrier that handles standing water indefinitely.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
New spray polyurethane foam roof installation that creates a seamless, self-adhering membrane with the highest R-value per inch of any roofing system. Energy-efficient, leak-proof, and engineered to last 30 to 50 years with periodic recoating.
Serving the growing town of Bath, NY, Lapolla Industries delivers the same spray foam roofing and insulation technology trusted by commercial and industrial facilities across the nation. Our Bath crews combine deep SPF expertise with local knowledge of New York building codes and climate demands.
Whether you need a spray foam roof on your commercial building, silicone coating on your flat roof, or closed-cell insulation in your attic, Lapolla Industries brings the equipment, materials, and experience to do it right. Every project in Bath starts with a free inspection and ends with a warranty you can count on.
Here is what sets Lapolla Industries apart from other contractors in Bath.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Have questions about spray foam in Bath? We have answers.
A properly installed SPF roof in Bath can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Bath we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Bath homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam insulation costs in Bath typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Bath homeowners see a full return on investment through energy savings within 3 to 5 years.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Bath, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
If your commercial roof in Bath is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.
See what our customers have to say about their experience with Lapolla Industries.
"Our flat roof on a strip mall had been leaking for months. Two other companies just slapped tar on it. These guys actually found the real problem — failed flashing at a parapet wall — and fixed it permanently."
"Attic insulation upgrade from blown-in to spray foam. The crew masked everything off properly and the overspray was minimal. The temperature in our attic dropped dramatically and so did our energy bills. Worth the investment."
"Had silicone roof coating applied to our office building. The crew was professional and the finish is smooth and uniform. Energy savings have been noticeable on our monthly bills. Would recommend for any flat or low-slope roof."
Lapolla Industries proudly serves property owners in these cities near Bath.